AECO ABP-1111S Silver-Plated Tellurium Copper Banana Plugs, set of 4
ABP-1111S / Silver Plated / USD 80.0
USD $80.00 You Save USD $24.00 (30%)
SGD $108.00 You Save SGD $32.00 (30%)
Note that aeco ABP-1111S Silver Plated Banana Plug is designed for binding post hole 4.0mm as stated on aeco official web page.
If use on binding post hole 4.1mm, may not get it tight fitting, functionally still working fine.
Note that it is suitable for cable with hole design for 4.5mm~6.5mm.
The body of plug was lathed in one piece to avoid the conduction loss when signal through the different structure and interface.
The interface was continued with hollow design to maintain the insertion force and crosscutting part was showed with spiral pattern for trendy design.
Terminal was half crosscutting in L shape and a ring with screw. It will be used to for solder type or screw type to lock tighten the cable.
The shell and body isolated and assemble by insulator materials to complete the isolated function.
The body of plug was lathed in one piece.
It has hollow design to provide enough insertion force. The body was locked with POM head lock tighten by assemble function.
POM head lock is tighten with shell together by screw, to insulate between body and shell due to the material feature.
The interface will adjust the shape due to binding post size and cause it into a perfect size
screw for conductor (3/4 mm) (4 each)
screw for cable (3/4 mm) (4 each)
1.We recommend to peel off the cable jacket and appear conductor part about 6mm.
2.This product is suitable for cable OD which is less than 6.3mm. Please remove the sleeve(141) if the cable OD is more than 4.3mm.
3.Please put the cable through the shell(131)
Please remove the ring and the screw[211 / 212] before you solder the cable (without jacket) on L shape crosscutting.
4.2. For screw type:
Please lock the cable (without jacket) in the ring with a screw[211 / 212].5.Please lock the shell on body set .
6.Please fix the cable and shell through screw[222 / 221].
Body: Tellurium Copper (#C14500 / copper contains over 99%)
Head lock: POM
Ring: Brass alloy (#C3604)
Shell: Brass alloy (#C3604)
Screw for conductor: Brass alloy (#C3604)
Screw for cable: Iron
Body: 120u” Silver plating (no nickel base)
Ring: 120u” Silver plating (no nickel base)
Screw for conductor: 3u” Gold plating (no nickel base)
Head lock: None
Shell: Logo lathing / Hairline surface treatment / Satin nickel plating
Screw for cable: Nickel plated.
Contact resistance < 0.3 mOhm (It was test by ABI-0601.)
Biggest OD 9.0mm
Cable hole without sleeve 6.5mm
Cable hole with sleeve 4.5mm
Total Length 43.0mm
Recommend soldering temperature:
Temperature Soldering Iron, please keep 400 °C within 8~10 second.
Temperature Soldering Iron, please keep 450 °C within 8~10 second.
Please shore up the body by solder equipment to avoid the high temperature caused the POM lock head deformed.
Product production process comply with RoHS.
Product made new TW patent No. M521314.