05. Classic Series ~ Speaker Jumper (Duelund Copper)

Designed and handcrafted with multiple combinations of Duelund tinned copper cables (12GA/20GA), carefully fine-tuned to achieve the highest sound quality and minimize signal transmission loss.

Audiolund Speaker Jumper ~ Classic Series 

• Use 1*12GA + 1*20GA Duelund tinned copper wire in both positive and negative ends of the speaker cable
• A total of 1m x 12GA + 1m x 20GA Duelund tinned copper wires are used for 25cm set of 4
• Use various types and multiple layers of shielding materials for shielding to reduce noise and RFI/EMI interference
• With unique damping design, use various types of anti-vibration/damping materials to suppress vibration and isolation
• 25cm standard length
• 2 pairs, 4 pcs set
• Options: Banana Plugs or Y Spade Plugs

Classic Series is the lowest cost of Audiolund series. It has the same Duelund WE typical sound characteristic and the sound performance is still better than many audiophile Speaker Jumper Classic Series Speaker Cable using 12GA + 20 GA Duelund wires, and added with multiple layers of copper/tin-cu film/shielding and multiple different types of vibration control/damping material. Audiolund Classic Series Speaker Jumper has the highest sound quality for the entry level Hi-Fi system/setup.

Classic Series Speaker jumper cross sectional area per meter per +/- channel in square millimeters is est. 3.83 mm² (Duelund Copper) 

My humble comments: Classic Series Speaker Jumper has the same Duelund WE typical sound characteristic. If you own an entry-level Hi-Fi system/setup, this Classic Series Speaker Jumper should be your top choice. Disclaimer: All the Hi-Fi setup different in terms of Equipment/Speaker/Room/Accessories etc. so, you may get different results in different setup. The above suggestion is only for your reading reference only.